0x4300010E


         Explanation
                  
            The blade server provided a complex descriptor that is not valid.  The
advanced management module cannot perform partition configuration or control until a valid
complex descriptor is provided by the target scalable blade complex. 

         
         
            Severity
         Warning
         
            Alert Category         Blades (Informational)
 -
mmTrapBladeS
         
            Log Source
         Blade_##
         
            Automatically notify service
         No
         
            Recoverable
         No
         
            Alarm Panel LED (BC T and BC HT)
         Minor
         User response
         Perform these steps:

               Reset the blade system management processor on all blade servers in the scalable blade complex. You
can reset the service processor through the advanced management module Web interface from the
Blade Power/Restart page.
               Reseat the scalable blade complex.
               Update the firmware for the service processor on the specified blade server.  You can
find the appropriate firmware on the IBM BladeCenter software and device drivers Web page.