0x806F000F


         Explanation
         The service processor for the specified blade server has detected a system firmware error.
The firmware will not be loaded.
         
            Severity
         Error
         
            Alert Category         Blades (Critical)
 -
mmTrapBladeC
         
            Log Source
         Blade_##
         
            Automatically notify service
         No
         
            Recoverable
         Yes
         
            Example Message         
            
               FW/BIOS, firmware progress (Pri FW Corrupt) error
               FW/BIOS, firmware progress (ABR Status) error
            

         
         
            Alarm Panel LED (BC T and BC HT)
         Critical
         User response
                  
            Refer to the Problem Determination and Service Guide for the specified blade server to determine the device-specific actions to resolve this event.  The
Problem Determination and Service Guide is available on the Web.

            If you do not have access to the Problem Determination and Service Guide, perform these steps:

                  Reboot the blade server.
                  Update the service processor firmware for the blade server through the
advanced management module Web interface.  Select Blade Tasks and then Firmware Update.
                  Reseat the blade server.
                  Update the system firmware for the blade server.
                  Replace the system board (trained service technician only).