0x806F010C


         Explanation
         An uncorrectable error has occurred on the specified DIMM (if provided) for the specified blade server.
The system will reboot, and this DIMM will be disabled.  Most likely, the DIMM will need to be replaced,
but you should follow the steps in the User Response to be sure that this is the appropriate action.
         
            Severity
         Error
         
            Alert Category         Blades (Critical)
 -
mmTrapBladeC
         
            Log Source
         Blade_##
         
            Automatically notify service
         Yes
         
            Recoverable
         Yes
         
            Example Message         
            
               Group 1 (All DIMMs) uncorrectable ECC memory error
               Group 1 (DIMM Group Status) uncorrectable ECC memory error
               Group 1 (DIMM Status) uncorrectable ECC memory error
               Group 1 (One of the DIMMs) uncorrectable ECC memory error
               Memory device 1 (DIMM 1 Status) uncorrectable ECC memory error
               Recovery Memory device 3 (DIMM 3 Status) uncorrectable ECC memory error
            

         
         
            Alarm Panel LED (BC T and BC HT)
         Critical
         User response
         Refer to the Problem Determination and Service Guide for the specified blade server to determine the device-specific actions to resolve this event.
The Problem Determination and Service Guide is available on the Web.