0x806F010D


         Explanation
         A fault has occurred for the specified hard disk drive for the specified blade server.
         
            Severity
         Error
         
            Alert Category         Blades (Critical)
 -
mmTrapBladeC
         
            Log Source
         Blade_##
         
            Automatically notify service
         Yes
         
            Recoverable
         Yes
         
            Example Message
         Hard drive 2 (SAS 2 Status) fault
         
            Alarm Panel LED (BC T and BC HT)
         Critical
         User response
                  
            Refer to the Problem Determination and Service Guide for the specified blade server to determine the device-specific actions to resolve this event.  The
Problem Determination and Service Guide is available on the Web.

            If you do not have access to the Problem Determination and Service Guide, perform these steps:

                  Replace the hard disk drive.
                  Check the IBM Support Web page for related service bulletins.
                  Update the associated firmware for the storage module, the blade server SAS expansion card options,
the SAS I/O modules, and hard drives if applicable.