0x806F010F


         Explanation
         The specified blade server has hung while loading BIOS.
         
            Severity
         Error
         
            Alert Category         Blades (Critical)
 -
mmTrapBladeC
         
            Log Source
         Blade_##
         
            Automatically notify service
         No
         
            Recoverable
         Yes
         
            Example Message
         FW/BIOS, firmware progress (Pri FW Corrupt) hang
         
            Alarm Panel LED (BC T and BC HT)
         Critical
         User response
                  
            Refer to the Problem Determination and Service Guide for the specified blade server to determine the device-specific actions to resolve this event.  The
Problem Determination and Service Guide is available on the Web.

            If you do not have access to the Problem Determination and Service Guide, perform these steps:

                  Attempt to reboot the blade server.
                  Determine the type of blade server for which this error has occurred.  You can find the blade server type from the advanced management module Hardware VPD information:

                        From the advanced management module Web Interface, click Hardware VPD.
                        From the command-line interface, enter the Info command).