0x806F0113


         Explanation
         The service processor on the specified blade server has detected a bus timeout.
         
            Severity
         Error
         
            Alert Category         Blades (Critical)
 -
mmTrapBladeC
         
            Log Source
         Blade_##
         
            Automatically notify service
         No
         
            Recoverable
         Yes
         
            Example Message
         Chassis (NMI State) bus timeout
         
            Alarm Panel LED (BC T and BC HT)
         Critical
         User response
                  
            Refer to the Problem Determination and Service Guide for the specified blade server to determine the device-specific actions to resolve this event.  The
Problem Determination and Service Guide is available on the Web.

            If you do not have access to the Problem Determination and Service Guide, perform these steps:

                  Remove the blade server from the BladeCenter chassis; then, reinstall it.
                  Reseat all the options installed in the blade server one, restarting the blade server each time, at a time to determine where the problem is located.
                  Remove options from the blade server one at a time to determine where the problem is located.
                  Replace the following components one at a time, in the order shown, restarting the blade server each time:

                        All options installed in the blade server.
                        System board assembly (trained service technician only).