0x806F0207


         Explanation
         The specified processor on the blade server has encountered a Built-In Self Test (BIST) failure.
         
            Severity
         Error
         
            Alert Category         Blades (Critical)
 -
mmTrapBladeC
         
            Log Source
         Blade_##
         
            Automatically notify service
         No
         
            Recoverable
         Yes
         
            Example Message
         Processor 2 (CPU 2 Status) BIST failure.
         
            Alarm Panel LED (BC T and BC HT)
         Critical
         User response
                  
            Refer to the Problem Determination and Service Guide for the specified blade server to determine the device-specific actions to resolve this event.  The
Problem Determination and Service Guide is available on the Web.

            If you do not have access to the Problem Determination and Service Guide, perform these steps:

                  Reboot the blade server.
                  Make sure the heat sink and CPU are secured on the system board.

                        Note: Be careful when handling the heat sink and CPU, they may be extremely hot.

                  
                  Check the IBM Support Web page for any service bulletins that might be related to this problem.