0x806F0607


         Explanation
         The service processor on the specified blade server detected a system management BIOS error, and the error cannot be corrected.
         
            Severity
         Error
         
            Alert Category         Blades (Critical)
 -
mmTrapBladeC
         
            Log Source
         Blade_##
         
            Automatically notify service
         No
         
            Recoverable
         Yes
         
            Example Message
         Processor 1 (CPU 1 Status) SM BIOS uncorrectable error
         
            Alarm Panel LED (BC T and BC HT)
         Critical
         User response
                  
            Refer to the Problem Determination and Service Guide for the specified blade server to determine the device-specific actions to resolve this event.  The
Problem Determination and Service Guide is available on the Web.

            If you do not have access to the Problem Determination and Service Guide, perform these steps:

                  Check the BIOS auxiliary log (if it exists) and resolve any issues specified. You can find information about the BIOS auxiliary log, if it exists, in the Problem
Determination and Service Guide and the User's Guide for the specified blade server type.
                  Reboot the blade server.
                  Reseat all option cards.
                  Update the firmware for the option cards and expansion board, if they exist.
                  Update the BIOS firmware for the blade server.  Firmware is available at the IBM BladeCenter software and device drivers Web site.
                  Replace the specified component.