0x806F0813


         Explanation
         The service processor on the specified blade server has detected
a bus error for the specified component, and the error cannot be corrected.
         
            Severity
         Error
         
            Alert Category         Blades (Critical)
 -
mmTrapBladeC
         
            Log Source
         Blade_##
         
            Automatically notify service
         Yes
         
            Recoverable
         Yes
         
            Example Message         
            
               System board (Critical Int) bus uncorrectable error
               Group 1 (Critical Int) bus uncorrectable error
            

         
         
            Alarm Panel LED (BC T and BC HT)
         Critical
         User response
                  
            Refer to the Problem Determination and Service Guide for the specified blade server to determine the device-specific actions to resolve this event.  The
Problem Determination and Service Guide is available on the Web.

            If you do not have access to the Problem Determination and Service Guide, perform these steps:

                  Update the firmware for the service processor (BMC), BIOS, and firmware for the advanced management module.
                  Reseat the memory DIMMs and any expansion cards.
                  Check ServeRAID-MR10ie Backup Battery Cable (p/n: 46C7172) to see if it is damaged or poorly connected to the ServeRAID-MR10ie Controller or ServeRAID-MR10ie Backup Battery.
                  Replace the system board (trained service technician only).