This topic describes some AMM events that you might encounter
with Basic BOFM.
- If the BOFM configuration
changes for a slot, then an information event is generated for that
slot.
- If a slot has BOFM configuration
enabled and the system management processor of the blade in that slot
does not support BOFM, then
a warning event is generated.
- If a slot has BOFM configuration
enabled and the blade's BIOS in that slot does not support BOFM, then
a warning event is generated.
- If a slot has BOFM configuration
enabled and any device in that slot does not support BOFM, thean
a warning event is generated.
- If any of the adapters reported a BOFM error,
then a warning event is generated.
- If the AMM was unable to apply a BOFM configuration
to a blade for which the system management processor supports BOFM, then
the blade is not given power permission and an error event is generated
for that blade.
- If the AMM cleared the BOFM configuration
after moving to a new chassis, then a warning alert is generated.
- If the AMM discovered that a BOFM configuration
is in use by a blade that is powered on and it is different from the
configuration defined on the AMM, then a warning event is generated.