CLI command

You can apply a new configuration using the bofm CLI command. To use the command, you must have a tftp server available for uploading the configuration file.

Format

bofm -d [on|off] | -i <ip> |-l <file name> | -p [on|off] | -v

Options

-d: check duplicate [on|off]
-i: ip of tftp server
-l: configuration file name
-p: check blade power state [on|off]
-v: verbose mode

Usage

Supply the tftp server IP address in the –i option, and the configuration file name in the –l (similar to the update CLI command). Adding the –d off option causes BOFM to ignore duplicate addresses in the configuration file. Adding the –p off option causes the BOFM to apply the configuration even on powered-on blades. These parameters default to "on".