Installing a BladeCenter chassis

Complete these steps to install a BladeCenter chassis in an Office Enablement Kit.

Note: For detailed instructions on installing a BladeCenter chassis, see the Installation and User's Guide provided with the BladeCenter chassis.
  1. Remove components that are installed in the BladeCenter chassis to decrease the weight, making it easier to install in a rack.

    Statement 32

    CAUTION:
    To avoid personal injury, before lifting the unit, remove all the blades, power supplies, and removable modules to reduce the weight.
  2. Attach the rails to the front and rear of the Office Enablement Kit, adjusting the length of the rails to fit the depth of the rack cabinet. Use the cage nuts that are provided with the BladeCenter chassis.
  3. Extend the rails and install the BladeCenter chassis in a rack.
  4. Install the components that you removed (and any other components or optional devices that you have ordered).
  5. Cable all components in the BladeCenter chassis to the appropriate external devices.
  6. Connect the BladeCenter chassis to power.
Parent topic: Installing optional devices