Extending the stabilizer bracket

If you install sliding devices inside the Office Enablement Kit, you must extend the stabilizer bracket before you extend any other sliding device.

Figure 1. Extending the stabilizer bracket

Complete the following steps to extend the stabilizer bracket:

1. Grasp the center of the stabilizer bracket firmly; then, extend the stabilizer bracket to its maximum position.
2. Install a device in the Office Enablement Kit, or service an extended sliding device; then, ensure that the device is fully inside of the rack cabinet.
3. Push the stabilizer bracket under the Office Enablement Kit when you are not installing or servicing a device in the Office Enablement Kit.