Installing the front door

Complete these steps to install the front door from the Office Enablement Kit.

Figure 1. Installing the front door

Note: Before you begin, both hinge pins (top and bottom) should be locked in place. Turn them to the left and make sure that they are in the hinge pin slot located on the hinge.

1. Hold the door perpendicular to the front of the Office Enablement Kit and slightly to the left of the opening.
2. Position the hold in the top of the door over the top hinge pin opening on the Office Enablement Kit hinge.
3. Rotate the top hinge pin to the right and push up on the hinge pin until it is engaged with the top of the door.
4. While supporting the door, slide the bottom of the door to position the bottom hinge pin opening on the door over the bottom hinge pin opening on the Office Enablement Kit hinge.
5. Rotate the bottom hinge pin to the right and push down on the hinge pin until it is engaged with the bottom of the door.
6. While supporting the door, push the bottom hinge pin down and to the right to engage the hinge pin.
7. Close and lock the door.