Replacing a door lock

There are two locks available on the Office Enablement Kit, one for the front door and one for the rear door. The process for replacing a door lock is the same for both doors.

Complete the following steps to replace a front door lock on the Office Enablement Kit:

Figure 1. Replacing a front door lock

1. If applicable, unlock and open the front door.
2. Remove the screw, pawl, and retaining nut from the inside of the Office Enablement Kit.
3. Remove the old lock assembly from the cabinet and discard the old parts.
4. Insert the new lock from the outside of the cabinet and hold the locking mechanism against the inside of the cabinet.
5. Tighten the nut that comes with the new lock.
6. Install the pawl; then secure the lock with the screw.