Replacing the hinge bracket and door latch

There are two hinge brackets and door latches, one for the front of the Office Enablement Kit and one for the rear. The procedure for replacing hinge brackets and door latches is the same.

Complete the following steps to replace a hinge bracket and door latch on the Office Enablement Kit:

Figure 1. Replacing the hinge bracket

1. Remove the front door from the Office Enablement Kit. See Removing the front door.
2. To replace the hinge bracket:
   1. Remove the four screws that secure the old hinge bracket to the rack cabinet; then, discard the old parts.
   2. Install the new hinge bracket using the four screws that come with the new hinge bracket.
3. To replace the door latch:
   Figure 2. Replacing the door latch

   
   1. Remove the screw that secures the old latch to the door assembly; then, discard the old parts.
   2. Install the new door latch using the screw that comes with the new door latch.
4. Install the front door on the Office Enablement Kit. See Installing the front door.