To access the WebGUI from any browser, use the following
procedure.
This procedure makes the following assumptions:
- The IP address for the Ethernet interface is 10.10.13.35
- The specialized HTTP server to support WebGUI access listens on
port 9090
-
Open a Web browser.
-
Type the following value in the Address field: https://10.10.13.35:9090
If the Web page displays successfully, the base firmware configuration
is successful.
-
Log in to the blade appliance with the local admin account
and password. If the DataPower Control Panel displays,
authentication of the local admin account is successful.