Use this table to view specific information about the blade
server, such as, blade server hardware features and the dimensions
of the blade server.
Notes:
- Power, cooling, removable-media drives, external ports, and advanced
system management are provided by the BladeCenter® unit.
- The operating system in the blade server must provide USB support
for the blade server to recognize and use the removable-media drives.
The BladeCenter unit uses USB for internal
communications with these devices.
The following table is a summary of the features and
specifications of the blade server.
Table 1. Features and specifications
|
Microprocessor: Supports one Intel LGA-771 microprocessor
Note: Use
the Configuration/Setup Utility program to determine the type and
speed of the microprocessors in the blade server.
Memory:
- Dual-channel, dual inline memory modules (DIMMs): 6 DIMM connectors
- Type: ECC double-data rate (DDR2 667) DRAM. Supports 512 MB, 1
GB, 2 GB, and 4 GB DIMMs with up to 24 GB of total memory on the system
board
Drives: Support for a pair of one of the following
storage drives:
- Hot-swap, small form factor (SFF) Serial Attached SCSI (SAS) hard
disk drives, and hot-swap solid state storage drives.
- Fixed SFF Serial Advanced Technology Attachment (SATA) hard disk
drives
- Fixed SFF SATA solid state storage drives
|
Predictive Failure
Analysis (PFA) alerts:
- Microprocessor
- Memory
- Hard disk drives
Electrical input: 12 V dc
Integrated
functions:
- Expansion card interface
- Local service processor: Baseboard management controller (BMC)
with Intelligent Platform Management Interface (IPMI) firmware
- ATI ES1000 video controller
- LSI 1064E SAS controller (type 8028 and 1916)
- SATA controller (type 8014)
- Concurrent keyboard/video/mouse (cKVM) support when optional cKVM
feature card is installed
- Light path diagnostics
- RS-485 interface for communication with the management module
- Automatic server restart (ASR)
- USB 2.0 for communication with the cKVM and removable media drives
- Serial over LAN (SOL)
- Redundant buses for communication with keyboard, mouse, and removable
media drives
|
Environment:
- Air temperature:
- Blade server on: 10°C to 35°C (50°F to 95°F). Altitude: 0 m to
914.4 m (0 ft to 3000 ft)
- Blade server on: 10°C to 32°C (50°F to 89.6°F). Altitude: 914.4
m to 2133.6 m (3000 ft to 7000 ft)
- Blade server off: 10°C to 43°C (50°F to 89.6°F). Altitude: 914.4
m to 2133.6 m (3000 ft to 7000 ft)
- Blade server shipping: -40°C to 60°C (-40°F to 140°F)
- Humidity:
- Blade server on: 8% to 80%
- Blade server off: 8% to 80%
Size:
- Height: 24.5 cm (9.7 inches)
- Depth: 44.6 cm (17.6 inches)
- Width: 2.9 cm (1.14 inches)
- Maximum weight: 4.8 kg (10 lb)
|