Use this information to diagnose and resolve storage drive self
test problems for the blade server.
Follow the suggested actions in the order in which they are listed
in the Action column until the problem is solved.
- See Parts listing, Types 8014, 8028 and 1916 to
determine which components are CRUs and which components are FRUs.
- If an action step is preceded by "(Trained service technician only)," that
step must be performed only by a trained service technician.
|
| Error code |
Description |
Action |
| 217-000-000 |
Passed the storage drive self test. |
N/A |
| 217-900-xxx |
Failed the storage drive self test. |
- Make sure that the storage drive is securely connected in the storage
drive connector, then; reseat the storage drive.
- Rerun the test.
- Make sure that the system BIOS firmware is at the latest level, upgrade
if necessary; then, rerun the test. The BIOS firmware level can be found in
the DSA Diagnostic Event Log within the Firmware/VPD section for this component.
The latest level firmware for this component can be found on the IBM support
Web site at http://www.ibm.com/support/docview.wss?uid=psg1MIGR-4JTS2T.
- Rerun the test.
- If the component failure remains, refer to Removing and replacing blade server components to
replace the failed component.
|
| 217-800-xxx |
The storage drive self test was terminated by the user. |
N/A |