Use this information to perform the checkout procedure for the
blade server.
To perform the checkout procedure, complete the following steps:
If the blade server is running, turn off the blade server.
Turn on the blade server. Make sure that the blade server has control
of the video (the LED on the keyboard/video/mouse button is lit). If the blade
server does not start, see Troubleshooting tables.
Record any POST beep codes that sound or POST error messages that
are displayed on the monitor. If an error is displayed, look up the first
error in the POST error codes.
Check the control panel blade-error LED; if it is lit, check the
light path diagnostics LEDs (see Light path diagnostics).
Check for the following results:
Successful completion of POST, indicated by a single beep.
Successful completion of startup, indicated by a readable display of the
operating-system desktop.
Did a single beep sound and are there readable instructions on
the main menu?