Use this information to the battery from the blade server.
Note:
- The following illustration shows the location and removal of the battery in the system board.
- The illustrations in this document might differ slightly from your hardware.
To remove the battery, complete the following steps:
- Before you begin, read Safety and Installation guidelines.
- If the blade server is installed in a BladeCenter® unit, remove it (see Removing the blade server from the BladeCenter unit for instructions).
- Remove the blade server cover (see Removing the blade server cover for instructions).
- If an optional expansion unit is installed, remove the expansion unit (see Removing an optional expansion unit).
-
Locate the battery on the system board.
-
Use one finger to press the top of the battery clip away from the
battery. The battery pops up when released.
- Use your thumb and index finger to lift the battery from the socket.
- Dispose of the battery as required by local ordinances or regulations.