Use this information to diagnose and resolve optional-device
problems.
Follow the suggested actions in the order in which they
are listed in the Action column until the problem is solved.
- See Parts listing to determine which components are CRUs and which components
are FRUs.
- If an action step is preceded by "(Trained service technician
only)," that step must be performed only by a trained service technician.
|
| Symptom |
Action |
| An IBM optional device that was just installed
does not work. |
- Make sure that:
- The device is designed for the blade server. See http://www.ibm.com/servers/eserver/serverproven/compat/us/.
- You followed the installation instructions that came with the
device and the device is installed correctly. See the instructions
that came with the device.
- You have not loosened any other installed devices or cables.
- You updated the configuration information in the Setup utility
program. Whenever memory or any other device is changed, you must
update the configuration. See Setup utility menu.
- If the device comes with its own test instructions, use those
instructions to test the device.
- Reseat the device that you just installed. See Removing and replacing field replaceable units (FRUs).
- Replace the device that you just installed. See Removing and replacing field replaceable units (FRUs).
|