Use this information to diagnose and resolve storage drive
self test problems for the blade server.
Follow the suggested actions in the order in which they
are listed in the Action column until the problem is solved.
- See Parts listing to determine which components are CRUs and which components
are FRUs.
- If an action step is preceded by "(Trained service technician
only)," that step must be performed only by a trained service technician.
|
| Error code |
Description |
Action |
| 217-000-000 |
Passed the storage drive self test. |
N/A |
| 217-900-xxx |
Failed the storage drive self test. |
- Make sure that the storage drive is securely connected in the
storage drive connector, then; reseat the storage drive.
- Rerun the test.
- Make sure that the system BIOS firmware is at the latest level,
upgrade if necessary; then, rerun the test. The BIOS firmware level
can be found in the DSA Diagnostic Event Log within the Firmware/VPD
section for this component. The latest level firmware for this component
can be found on the IBM support Web site at http://www.ibm.com/support/docview.wss?uid=psg1MIGR-63017.
- Rerun the test.
- If the component failure remains, refer to Removing and replacing blade server components to
replace the failed component.
|
| 217-800-xxx |
The storage drive self test was terminated by the
user. |
N/A |