Removing and replacing field replaceable units (FRUs)
Use this information to remove and replace field replaceable
units (FRUs).
Note: For information on installing
FRU parts in the IBM WebSphere DataPower Integration Blade XI50B Type
4195 appliance, see the Installation and User's Guide that
came with the blade appliance.
FRUs must
be installed only by trained service technicians. The illustrations
in this document might differ slightly from your hardware.
Removing a microprocessor and heat sink
Use this information to remove a microprocessor and heat sink from the blade server. For related information for the DataPower Integration Blade XI50B blade appliance, see the IBM WebSphere DataPower Integration Blade XI50B Type 4195 Installation and User's Guide.
Thermal grease
Use this information to determine the guidelines for using thermal grease on a heat sink and processor.
Removing the system-board assembly
Use this information to remove the system-board assembly from the blade server. For related information for the DataPower Integration Blade XI50B blade appliance, see the WebSphere DataPower Integration Blade X150B pdsg Addendum document available on the IBM Web site at http://www.ibm.com/systems/support/.
Installing the system-board assembly
Use this information to install the system-board assembly in the blade server. For related information for the DataPower Integration Blade XI50B blade appliance, see the WebSphere DataPower Integration Blade X150B pdsg Addendum document available on the IBM Web site at http://www.ibm.com/systems/support/.