Use this information to perform the checkout procedure
for the blade server.
To perform the checkout procedure, complete the following
steps:
If the blade server is running, turn off the blade server.
Turn on the blade server. Make sure that the blade server
has control of the video (the LED on the keyboard/video/mouse button
is lit). If the blade server does not start, see Troubleshooting tables.
Record any POST error messages that are displayed on the
monitor. If an error is displayed, look up the first error in the POST/UEFI diagnostic codes.
Check the control panel blade-error LED; if it is lit,
check the light path diagnostics LEDs (see Light path diagnostics).
Check for the following results:
Successful completion of POST, indicated by beginning the startup
of the operating system.
Successful completion of startup, indicated by a readable display
of the operating-system desktop.