Use this information to configure UEFI compatible devices.
Your IBM BladeCenter HS23E Type 8038 or 8039 blade server is UEFI compatible. UEFI
compatible expansion cards can be configured through the Setup utility.
To configure a UEFI compatible expansion card, complete the following
steps:
Note: Before configuring a UEFI compatible
device, it is recommended to update the firmware for your blade server.
See
Updating firmware and device drivers for information on
how to update the firmware for your blade server.
- Run the Setup utility (see Using the Setup utility).
- Select System Settings → Network or Storage depending
on the type of your adapters.
Note: Select System Settings → Adapters
and UEFI drivers for UEFI 2.0 (and prior) compliant adapters and
drivers installed in the server.
- Select Please refresh this page first and press Enter.
- Select the device driver that you want to configure and press
Enter.
- When you have finished changing settings, press Esc to exit from
the program; select Save to save the settings that you have
changed.