Use these instructions to start the HII Configuration Application.
To start the HII Configuration Application, complete the
following steps:
- Turn on the blade server, and make sure that the blade server
is the owner of the keyboard, video, and mouse.
Note: Approximately
20 to 40 seconds after the server is connected to power, the power-control
button becomes active.
- When the prompt <F1 Setup> is displayed, press
F1. If you have set an administrator password, you are prompted to
type the password.
- Select System Settings → Storage.
- Under Storage, select the ServeRAID adapter you want to
configure and press Enter to continue.
When you have finished changing settings, press Esc to
exit from the program; select Save to save the settings that
you have changed.