Ethernet controller tests - BladeCenter HX5

Use this information to resolve Ethernet controller errors.

Follow the suggested actions in the order in which they are listed in the Action column until the problem is solved.

See Parts listing - BladeCenter HX5 to determine which components are CRUs and which components are FRUs. If an action step is preceded by "(Trained service technician only)," that step must be performed only by a trained service technician.
Error code	Description	Action
405-000-xxx	Passed the EEPROM test on the system board.
405-001-xxx	Passed the MII registers test.
405-002-xxx	Passed the EEPROM test on the system board.
405-003-xxx	Passed the internal memory test
405-004-xxx	Passed the interrupt test.
405-005-xxx	Passed the MAC layer loopback test.
405-007-xxx	Passed LED test.
405-901-xxx	Failed the Broadcom Ethernet tests due to a failure in the internal registers	Make sure that the component firmware level is up-to-date, and upgrade if necessary. The installed firmware level can be found in the DSA log within the Firmware/VPD section for this component. The latest level firmware for this component can be found at http://www.ibm.com/support/ fixcentral/systemx/groupView? query.productGroup=ibm%2FBladeCenter. Run the test again. See Diagnostic tools overview. If the failure remains, refer to Removing and replacing blade server components to replace the failed component.
405-902-xxx	Failed the Broadcom Ethernet tests due to a failure in non-volatile RAM	Make sure that the component firmware level is up-to-date, and upgrade if necessary. The installed firmware level can be found in the DSA log within the Firmware/VPD section for this component. The latest level firmware for this component can be found at http://www.ibm.com/support/ fixcentral/systemx/groupView? query.productGroup=ibm%2FBladeCenter. Run the test again. See Diagnostic tools overview. If the failure remains, refer to Removing and replacing blade server components to replace the failed component.
405-903-xxx	Failed the Broadcom Ethernet tests due to a failure in internal memory	Make sure that the component firmware level is up-to-date, and upgrade if necessary. The installed firmware level can be found in the DSA log within the Firmware/VPD section for this component. The latest level firmware for this component can be found at http://www.ibm.com/support/ fixcentral/systemx/groupView? query.productGroup=ibm%2FBladeCenter. Run the test again. See Diagnostic tools overview. If the failure remains, refer to Removing and replacing blade server components to replace the failed component.
405-904-xxx	Failed the Broadcom Ethernet tests due to a failure in interrupts	Make sure that the component firmware level is up-to-date, and upgrade if necessary. The installed firmware level can be found in the DSA log within the Firmware/VPD section for this component. The latest level firmware for this component can be found at http://www.ibm.com/support/ fixcentral/systemx/groupView? query.productGroup=ibm%2FBladeCenter. Run the test again. If the failure remains, refer to Removing and replacing blade server components to replace the failed component.
405-905-xxx	Failed the Broadcom Ethernet tests due to a failure in loopback test at MAC layer.	Make sure that the component firmware level is up-to-date, and upgrade if necessary. The installed firmware level can be found in the DSA log within the Firmware/VPD section for this component. The latest level firmware for this component can be found at http://www.ibm.com/support/ fixcentral/systemx/groupView? query.productGroup=ibm%2FBladeCenter. Run the test again. See Diagnostic tools overview. If the failure remains, refer to Removing and replacing blade server components to replace the failed component.
405-906-xxx	Failed the Broadcom Ethernet tests due to a failure in loopback test at physical layer.	Make sure that the component firmware level is up-to-date, and upgrade if necessary. The installed firmware level can be found in the DSA log within the Firmware/VPD section for this component. The latest level firmware for this component can be found at http://www.ibm.com/support/ fixcentral/systemx/groupView? query.productGroup=ibm%2FBladeCenter. Run the test again. See Diagnostic tools overview. If the failure remains, refer to Removing and replacing blade server components to replace the failed component.
405-907-xxx	Failed the Broadcom Ethernet tests due to a failure in status LED operation.	Make sure that the component firmware level is up-to-date, and upgrade if necessary. The installed firmware level can be found in the DSA log within the Firmware/VPD section for this component. The latest level firmware for this component can be at http://www.ibm.com/support/ fixcentral/systemx/groupView? query.productGroup=ibm%2FBladeCenter. Run the test again. See Diagnostic tools overview. If the failure remains, refer to Removing and replacing blade server components to replace the failed component.