The following replaceable components are available for the IBMIBM MAX5 expansion blade. There are two versions of the IBM MAX5 expansion blade, referred to as the IBM MAX5 version 1 and IBM MAX5 version 2 in this document. IBM MAX5 version 2 has a "MAX5" identifying label on the bottom of the front bezel. The functionality of the two IBM MAX5 expansion blades are equivalent except for the type of DIMMs supported. The type of DIMMs supported will differ, depending on the version of IBM MAX5 expansion blade installed.
For an updated parts listing on the web, complete the
following steps.
Note: Changes are made periodically to the IBM website.
The actual procedure might vary slightly from what is described in
this document.
- Go to thehttp://www.ibm.com/supportportal/.
- Under Product support, click BladeCenter.
- Under Popular links, click Part documents lookup.
- From the Product Family menu, select BladeCenter HX5 and click Go.
Note: The illustrations in this document might differ slightly
from your hardware.
Replaceable components are of four types:
- Tier 1 customer replaceable unit (CRU): Replacement of Tier 1 CRUs is your responsibility. If IBM installs a Tier 1 CRU at your request, you will be charged for the installation.
- Tier 2 customer replaceable unit: You may install a Tier 2 CRU yourself or request IBM to install it, at no additional charge, under the type of warranty service that is designated for your server.
- Field replaceable unit (FRU): FRUs must be installed only by trained service technicians.
For information about the terms of the warranty and getting service and assistance, see the Warranty and Support Information document.
| Index | Description | CRU part number (Tier 1) | CRU part number (Tier 2) | FRU part number |
|---|---|---|---|---|
| 1 | Cover (Type 7872 models) | 68Y7859 | ||
| 1 | Cover (Type 7873 models) | 68Y7957 | ||
| 2 | Memory, 4 GB, 2R x 8, 2 Gbit DDR-3 1333 MHz VLP DIMM | 44T1586 | ||
| 2 | Memory, 8 GB, 4R x 8, 2 Gbit DDR-3 1066 MHz VLP DIMM | 46C7504 | ||
| CPU tall heat sink, microprocessor (130W) Note: This heat sink can be installed only in an BladeCenter HX5 blade server that has an IBM MAX5 expansion blade installed.
|
44X2170 | |||
| IBM MAX5 expansion blade (version 1) | 88Y6176 | |||
| IBM MAX5 1-node scalability card | 59Y5878 | |||
| Miscellaneous parts kit | 44X2168 | |||
| DIMM fillers | 60H2962 |
| Index | Description | CRU part number (Tier 1) | CRU part number (Tier 2) | FRU part number |
|---|---|---|---|---|
| 1 | Cover (Type 7872 models) | 68Y7859 | ||
| 1 | Cover (Type 7873 models) | 68Y7957 | ||
| 2 | Memory, 2 GB, 1R x 8, 2 Gbit PC3L-10600R-999 VLP RDIMM (1.35V capable) | 46C0572 | ||
| 2 | Memory, 4 GB, 2R x 8, 2 Gbit PC3L-10600R-999 VLP RDIMM (1.35V capable) | 46C0576 | ||
| 2 | Memory, 8 GB, 2R x 8, 4 Gbit DDR-3 1333 MHz VLP RDIMM (1.35V capable) | 00D4987 | ||
| 2 | Memory, 8 GB, 4R x 8, 2 Gbit PC3L-8500R-777 VLP RDIMM (1.35V capable) | 46C0582 | ||
| 2 | Memory, 16 GB, 2R x 4, 4 Gbit DDR-3 1333 MHz VLP RDIMM (1.35V capable) | 49Y1528 | ||
| 2 | Memory, 16 GB, 2R x 4, 4 Gbit DDR-3 1600 MHz VLP RDIMM | 90Y3159 | ||
| 2 | Memory, 16 GB, 4R x 4, 2 Gbit DDR-3 1066 MHz VLP RDIMM (1.35V capable) | 90Y3223 | ||
| 2 | Memory, 32 GB, 4R x 4, 4 Gbit DDR-3 1333 MHz VLP RDIMM (1.35V capable) | 00D5010 | ||
| CPU tall heat sink, microprocessor (130W) Note: This heat sink can be installed only in an BladeCenter HX5 blade server that has an IBM MAX5 expansion blade installed.
|
44X2170 | |||
| IBM MAX5 expansion blade (version 2) | 88Y6129 | |||
| IBM MAX5 1-node scalability card | 59Y5878 | |||
| Miscellaneous parts kit | 44X2168 | |||
| DIMM fillers | 60H2962 |
Miscellaneous Parts Kit
The
following parts are provided in the miscellaneous parts kit:
- Float plate assembly
- Bezel screw
- Heat sink baffle
- Left filler plate
- Right filler plate
- Screw, M3x16 socket hex drive