Installing the scalability tray

Use this information to install the scalability tray on a blade server.

1. Before you begin, read Safety and Installation guidelines.
2. Carefully lay the blade server on a flat, static-protective surface, with the cover side down.
3. Align the scalability tray flush with the blade server in the start position. The pins on the scalability tray should be aligned with the holes in the blade server.
   
   
   
4. Pressing down firmly on the middle of the tray, slide the scalability tray forward toward the bezel until there is an audible click each side of the blade server.
   
   
   
5. Attempt to pull the scalability tray back to ensure that the scalability tray is firmly seated.
6. Look in the holes on each side of the blade server to ensure that the spring plates are engaged.