clearlog command

This command clears the management-module audit event log, the system event log, or both.

Table 1. clearlog (clear management-module event log) command
Function What it does Command Valid targets
Clear management-module event log Clears the management-module event log and displays a message confirming that the specified event log was cleared. clearlog

Command use restricted (see Commands and user authority).

                           -T system:mm[x]

where x is the primary management-module bay number.

Example: To clear the management-module audit log, while management module 1 is set as the persistent command environment, at the system:mm[1]> prompt, type

The following example shows the information that is returned:

               system:mm[1]> clearlog