identify (location LED) command

This command controls operation of the location LED in a blade server or in the BladeCenter unit. It can also be used to display the state of a location LED.

Table 1. identify (location LED) command
Function	What it does	Command	Valid targets
Display location LED state	Displays the current state of the location LED in the command target. Possible LED states are: off on blink	`identify`	`-T system` `-T system:blade[x]` where x is the blade bay number.
Set location LED state	Sets the state of the location LED in the command target.	`identify -s` state where state is `on` `off` `blink` Command use restricted (see Commands and user authority).	`-T system` `-T system:blade[x]` where x is the blade bay number.
Turn on BladeCenter unit location LED for specified period of time	Turns on the location LED in the BladeCenter unit for a specified period of time before turning it off automatically.	`identify -s on -d` time where time is the number of seconds the location LED will remain lit. Command use restricted (see Commands and user authority).	`-T system`

Example: To display the status of the location LED in the blade server in blade bay 4, while the BladeCenter unit is set as the persistent command environment, at the system> prompt, type

                  identify -T system:blade[4]

To light the location LED in the blade server in blade bay 4, while the BladeCenter unit is set as the persistent command environment, at the system> prompt, type

                  identify -s on -T system:blade[4]

The following example shows the information that is returned from a series of identify commands:

               system> identify -T system:blade[4]
-s off
system> identify -s on -T system:blade[4]
OK
system> identify -T system:blade[4]
-s on
system>