This topic lists error messages for the info command.
See Common errors for a list of error messages that apply to all commands.
| Error message | Definition |
|---|---|
| Device not found | No VPD is available for the targeted device. |
| Getting blade H8 firmware VPD data of blade blade_number failed. where blade_number identifies the blade server. |
An error occurs while the management module is reading the blade H8 firmware VPD data of the targeted blade server. |
| Getting compact flash cards information failed. | An error occurs while the management module is reading the compact flash cards information. |
| Getting firmware's VPD data of type failed. | An error occurs while the management module is reading the firmware's VPD data of targeted type. |
| Getting name of blade blade_number failed. where blade_number identifies the blade server. |
An error occurs while the management module is reading the name of the targeted blade server. |
| Getting name of mm bay_number failed. where the bay_number specifies the management module. |
An error occurs while the management module is reading the name of the targeted management module. |
| Reload Firmware VPD failed. | An error occurs while the management module is reloading the firmware VPD. |
| Reload Hardware VPD failed. | An error occurs while the management module is reloading the hardware VPD. |
| Reload all failed. | An error occurs while the management module is reloading all VPD and MAC addresses. |
| Reload MAC address failed. | An error occurs while the management module is reloading the MAC address. |
| Reload WWN failed. | An error occurs while the management module is reloading WWN. |
| Status: Unable to read status. | An error occurs while the management module is reading the firmware update status. |
| Unknown device type. | The command is targeted to an unknown device type. |