This topic lists error messages for the snmp command.
See Common errors for a list of error messages that apply to all commands.
| Error message | Definition |
|---|---|
| Arguments containing spaces must be enclosed in quotation marks | A user tries to enter a string containing spaces that has an opening quotation mark without a closing quotation mark. |
| At least one configured community is required to enable SNMP. | A user tries to enable SNMP without configuring at least one community name. |
| Config failed. IP address of 0.0.0.0 is allowed only for the first host name in the first community. | A user tries to set an IP address of 0.0.0.0 for something other than the first host name of the first community. |
| Config failed. IP address of 0.0.0.0 is allowed only when the first community is configured as Get access type. | A user tries to set an IP address of 0.0.0.0 for the first host name of the first community when the first community is not configured with the Get access type. |
| Config failed. You defined a community without an IP address or host name. | A user tries to define a community without specifying an IP address or host name. |
| Config failed. You defined a duplicate community name. | A user tries to define a two communities with the same name. |
| Enabling/Disabling snmp interface failed. | An error occurs while the management module is enabling or disabling an snmp interface. |
| Enabling/Disabling snmp traps failed. | An error occurs while the management module is enabling or disabling the snmp traps. |
| Enabling/Disabling SNMPv3 Agent failed. | An error occurs while the management module is enabling or disabling the SNMPv3 Agent. |
| Input length is greater than the maximum characters allowed. | A user tries to enter too many characters in an input field. |
| Invalid community name. | A user tries to set a community name to an invalid value. |
| Invalid host name or ip address. | A user tries to set the SNMP host name or IP address to an invalid value. |
| Setting access type of type for SNMPv3 failed where type is the type of SNMPv3 access desired. |
An error occurs while the management module is setting access type for an SNMPv3. |
| Setting location/contact of the SNMP agent failed. | An error occurs while the management module is setting the location or contact of the SNMP agent. |