Installing the disk drive tray

You can install the disk drive tray.

Figure 1. Installing the disk drive tray

To install the disk drive tray, complete the following steps:

1. Place the drive tray ( 1  in Figure 1) into position on the system board and install the four screws to secure it.
2. Install the disk drive that was removed from the drive tray. See Installing a hard-disk drive for instructions.
3. Install and close the blade server cover. See Installing and closing the blade server cover.

   Statement 21

   
   CAUTION:
   Hazardous energy is present when the blade server is connected to the power source. Always replace the blade server cover before installing the blade server.
4. Install the blade server into the BladeCenter unit. See Installing the blade server in a BladeCenter unit.